Unable To Detect Range Extender SSID Name In Range Extender!

This article is for those who are getting the problem in detecting the network name of the range extender or wireless devices. This normally encounters if SSID of an extender is not broadcasting properly or extender has not booted properly.

First, reboot your extender and check if the problem is resolved or not. If the problem still persists, then check if the SSID has been broadcasted by your extender or not.

The below-mentioned steps can be implemented to check the SSID whether broadcasted or not:

1. Connect your extender to the computer or laptop with the help of Ethernet cable.
2. Open the extender GUI from mywifiext.net
3. If asked for the username and password, enter the name and password you have used for creating an extender account. By default, the username and password is an admin. If it is not working, then someone else might have changed your password.
4. Open ‘Wi-Fi settings’ and click on ‘Enable 2.4 GHz wifi’. Check if ‘Broadcast this Network name’ is enabled or not. If not, then enable it. If you are using an older version of Netgear UI, then you can open the settings from the ‘Advanced menu’. Click to enable SSID broadcast.
5. Verify the name or SSID of your extender from here and select the right SSID.

Power LED blinking

This encounters if the firmware version of the extender is corrupt or no sufficient power supply from the source.

1. You must ensure that your extender is connected properly to the source.
2. Reset your extender by clicking the reset button with the help of pin or paper clip. Press the button for at least 20 seconds.
3. If you still find the power LED blinking, then download the latest version of software from the Netgear Download center and save it in your computer.
4. After getting all the files in your PC, you need to hard reset your extender.

Note: It is recommended to perform a hard reset before performing firmware recovery.

5. Connect the computer to the extender and check the valid IP address if given or not. If not, set a static IP address to the computer.

Example: IP address: 192.168.1.1.0

Subnet mask: 255.255.255.0.

Default gateway: 192.168.1.250

In DNS boxes, you can leave it as it is.

6. Restart your computer.
7. Once your computer gets restarted, open command prompt and try to open IP address of extender.
8. If you are able to click on the IP address successfully, then proceed to the next step. If not, then it means the extender is beyond recovery.
9. Run the downloaded file now.
10. Type password in the password box and IP address in the server box.
11. From the file section, go to ‘Browse button’ and select the latest firmware you downloaded recently.
12. Click on ‘Upgrade’ button and check if the message is shown up or not.
13. If you find a successful message on the screen, then change the IP address of the computer to the DHCP again.

Note: After successful completion of recovery process, you will find power LED turn green or white. If you find the LED still flashes green, then it means that firmware can’t be recovered and it should be replaced.

14. Perform hard reset again and setup your extender normally. For installation and reconfiguration of the extender, click on the link ‘Setting up Netgear range extender’.

www mywifiext net setup | mywifiext net | www mywifiext net setup wizard

 

What Are the Specialties in Netgear X4 Wi-Fi Range Extender?

Do you know the first company to launch a wall-plug Wi-Fi range extender for streaming high-definition multimedia at a speed of more than 2 GBPS? Well, who else could be it other than Netgear? Netgear is a global leader when it comes to routers, modems and range extenders, and this wall-plug Wi-Fi range extender proves it quite clearly.

Nighthawk X4 Wi-Fi range extender is the model that we are discussing here, and the range that this product has to offer is just mind-blowing. 10,000 square feet of Wi-Fi coverage! Which product gives that other than this amazing range extender coming straight from the house of Netgear?

This new Wi-Fi range extender comes with MU-MIMO and Beamforming+ technology, which is going to expand the existing range of your Wi-Fi router to more than 10,000 square feet, and also enables you to stream data to multiple devices at a fast speed of around 2 GBPS.

This is the first premium wall-plug extender available on the market, and it showcases the ability of the Netgear to manufacture a product that has an enhanced network accessibility, performance and Wi-Fi range. You can setup this device by going to mywifiext net login link.

Easily extend your home network with this new Wi-Fi range extender!

Not everybody is happy with the performance of their home network. Many people complain about the dead spots that are present in the home, where internet signal doesn’t reach.

If companies want people to stay connected with the world, then they will have to come up with something really innovative, so that the issues like ‘dead spots’ are eliminated for good. However, dead spots can be eradicated from the premises by installing a Wi-Fi range extender. It will improve the overall coverage and performance of the internet as well.

What’s so special in Nighthawk X4 Netgear Wi-Fi Range Extender?

This device consists of four internal antennas, which are optimized to provide excellent performance to the most advanced 802.11ac mobile devices throughout the home. It will also support older Wi-Fi devices, so don’t worry if you are still using an old Wi-Fi device.

The area it covers is definitely something that would impress everyone because there are not too many Wi-Fi range extenders that cover more than 10,000 square feet of area and provide a speed of around 2.2 GBPS, even during HD streaming on multiple devices at one time.

Let us check out some of the key features in terms of technology that this Wi-Fi range extender has to offer:

1. MU-MIMO support available, which means, the extender is capable of doing multitasks and streaming data to multiple devices simultaneously.
2. There is a patented Fastlane Technology that has been used in this product, which allows it to use two Wi-Fi bands at the same time to establish a single super-fast wireless connection.
3. To improve the wireless range and reliability of the Wi-Fi signal, Beamforming + feature has been incorporated into the device. This will transmit data to the mobile devices directly rather than broadcasting the signal to a larger area.
4. To improve the quality of transmissions that are obtained from mobile devices, a low-noise amplifier has been incorporated into the range extender. With this, the Wi-Fi range is further extended to reach devices that are placed at longer distances.

To configure this Wi-Fi range extender, you need to go to www mywifiext net setup link. If the device has been properly configured, yet you are experiencing issues, then you can get in touch with experts who know how to fix issues in a Wi-Fi range extender.

www mywifiext net setup | www mywifiext net setup wizard | www mywifiext net

How to setup Linksys Wireless N Range Extender Manually?

Wireless range extenders are used to repeat and enhance the signal strength of a network so that it can be receipted properly on every device. You can access internet on multiple devices from hard to reach area. You need to setup Wi-Fi extender first on the network, then only you will be able to use your Linksys wireless extender.

Before starting with the configuration, you must know the below mentioned details of your router:

• The wireless name also called as SSID.
• Channel name
• Password or secure key for your network.

You can change the aforementioned settings of your router any time by just visiting the router manufacturer link. You can take help from official router IP address even.

1. Reset your Wireless range extender: To reset the range extender, click the ‘Reset’ button from the top of the device. Press and hold the button for at least 5 seconds. You will find LED start blinking which notifies you of factory default settings.

• Connect the range extender to the computer with the help of Ethernet cable. You need to connect one end of Ethernet cable to router end and another end to computer Ethernet port.
• You will find your extender details displayed on the computer screen. If the product image doesn’t match with the device, you need to check the device from the list of devices. If you are using Linksys extender, then setup will be opened on the screen and if you using Netgear router, then the Netgear extender setup page will be opened on the screen.
• Connect the extender to the power supply with the help of power adapter.
• Open the browser on the computer and go to range extender IP address. If you don’t know the IP address of your range extender, then check it from the back side of your device.
• You are now required to enter the default username and password for the extender.
• Enter admin in the password field and leave the username box blank. Click ‘Login’.
• Now, go to wireless settings and click on ‘Manual’ option and enter the SSID.
• You will be directed to the wireless security section. Here, enter the passkey of your choice and save it for future.
• Now disconnect the router and the extender from the power supply by removing the power cords for 10 seconds. Connect them again to the power supply.
• Wait for few seconds till the lights get stable.

Quick Tip: If you want to check whether the extender is properly configured or not, open the DHCP table of the router and check if your device is listed there or not. You can also ping your extender from the computer. If you don’t know the process to check the device, then you can go to http://www.mywifiext.net link.

How to expand the network: Apart from extenders, there are some other devices also available in the market which will help you in extending the network signal to a distance. If you want to get a complete list of such devices, then you can visit the link available on our support page. You can select the product according to your need and requirement.

mywifiext | mywifiext net | www mywifiext net setup wizard

How To Solve Slow Wireless Or Connection Issues With Wi-Fi Extender?

Things like proper settings, placement and reducing the interference within the router and the Wi-Fi range extender will help you in fixing the wireless and connection problem of your Wi-Fi extender.

Now we are going to discuss the steps to get rid of this problem:

1. Check the name of the network: If you are a user of Mywifiext, then a number of networks will be available on its screen with different SSID. If you don’t know your SSID, then your modem name is available at the back of its hardware. You can easily find it from there and connect your extender to that SSID.

The strength and the signal of your wireless router depend on the location of it where you have placed inside the home. If it is kept in open, then you will get the proper signal strength on the other hand if you have placed it in a congested area, then the signal strength will get affected. It is important to mention that your modem comes with 2.5 GHz and 5 GHz frequencies. If you want proper coverage, then select 2.5 GHz band from it.

If you want to change the name of your network, then you can do so easily by calling the support provider or read the manual of your router given along with the box.

2. Check the location of the modem: It is important for you to understand that neither modem nor extender should be placed on an electronic device because the electromagnetic fields and the heat generated by the electronic device might affect the signal strength and can even damage the router.
3. Low signal strength and high interface: You will not be able to complete the www mywifiext net setup or run it properly if the strength of the signal is poor or not proper. You must place the modem and the extender 1 feet away from other wireless devices otherwise the EM interference will keep on affecting the signal strength.
4. Restart the computer: Switch off the computer and turn it on again. Sometimes restarting the computer will clear the speed issues and all the background processes will be stopped after restarting the computer.
5. Check Peer-to-peer sharing: Any uploading and downloading of files using the Peer-to-peer software may affect the connection. If you are downloading the files using mywifiext net login, then close the programs like UTorrent, LimeWire and check it again.
6. Reset the router: If you are running the network devices for a long time, then it is recommended to reset the router. This will help you in fixing the problem of connection.

Steps to reset the modem are:

• Turn off the computer.
• Press the power button given at the back of the modem and remove the cable from it.
• Wait for 20 seconds and turn on the modem and computer again.

Steps for resetting the Wi-Fi extender:

• Disconnect the power cord of your Wi-Fi extender and wait for next 30 seconds.
• Connect the power cords again into the extender and turn it on.

7. Check for spyware: It is a type of program that collects the information related to the connection without your knowledge and keep on harming the computer. It can even slow down the processing of your computer. It is therefore recommended to scan for spyware in the computer and clean it as early as possible.

How to Configure and Setup Netgear Extender with Your PC?

Have you bought Netgear extender recently? If yes, then here is how you can setup Netgear extender and configure it with your PC. The process is simple and can be done by following below mentioned steps.

A number of people are using Netgear extender to improve the frequency of their internet. The main role of an extender is to increase the length of the internet connectivity. Netgear range extender is used by the majority of the people because it is a highly reliable machine that offers great functionality and reliable performance.

You can easily setup Range Extender wifi by making use of www mywifiextnet net login link. In this blog post, we are going to discuss the setup process only, so pay a close attention to this blog post.

1. Take the device out of the box and plug it into the power outlet. Now, turn on the device.
2. So, your range extender is turned on now, and it’s time to go to your computer where you will have to open taskbar. You will see ‘Wi-Fi’ icon there, which you will have to click.
3. You are going to come across many networks including a new network that will be named as ‘Netgear.ext’.
4. Click on ‘Netgear.ext’ and try to connect with it. You will have to open your web browser when you are connected. It could be any web browser, as each one of those works fine with it.
5. You will have to enter ‘mywifiext.net’ in the address bar and hit ‘enter’. It is going to take you to the Netgear configuration portal.
6. Now, you will have to click on ‘New Extender Setup’, as you will have to register your extender with Netgear. You will do it by taking help of your email. So, create an account.
7. You will now be asked about how you wish to use your extender in the next portal to which, you will have to select ‘WiFi Range extender’.
8. It is now going to search for Network and will also provide you with a list of wireless networks. You will have to select your main router network name followed by clicking ‘next’.
9. You will now have to enter the password for your existing network, also known as the main router wireless password. Once entered, click on ‘next’. If you can’t access http www.mywifiext.net.
10. If you want to change the name of the network and/or password for Netgear extender, then you can do that on the next page. Once done, click ‘Next’.
11. Doing this will apply all settings and you are going to see all the new information about that extender on your computer screen.
12. After all the settings have been properly saved, you will have to restart the devices and place the Wi-Fi extender within a range of the main router. You must provide a clear line of sight so that the signal could hit the extender without any obstruction. This is the process of how to set up Wifi at home or office using an extender.

With this, the setup process of your Netgear extender has been completed. Now, you can use it with any device of your choice. If you come across any issue, then you can take help of an expert. But first, you should reset the Netgear extender and try to set it up again.